how to make fighting robot at home

Two holes should be equally placed on the top and another two holes on the bottom parts of the C shaped or [ shaped piece of sheet metal.Ya I tries one and it took three tries to cut a paint stirrer in half ,but would you be able to help out with a rc flamethrower attachment?hii, as the saw is connected straight to the battery with a switch once the switch is turned on, the saw will always run full time unless the switch is turned off or battery runs out.Firstly with the base laid on the ground, we need the four small 4x1 cm pieces, with them they must be bent at about 1 cm in, from one side of the aluminum piece, this makes an L shaped piece, the bottom part of the L shape must then have holes drilled into themI have been wanting to make my own battlebot, but I don't have the proper equipmentCan I please ask for the dimensions of this robot?Hi, unfortunately not really, i have tested it on an aluminum cans an it does cut it but the blade I used is fairly thick, and the motor has not much torque so it slows to a stop fairly quickly.This was probably the hardest part, the body can be made however you wish, on my instructable i used a triangle based body, this made it strong and also wasn't too hard to do.and i can't find a servo that is the right sizeThanks, that's what I was looking for to make a smaller version of the bigger bots. The biggest and fastest robot here, and definitely one of the more challenging ones, the “Cute Walking Robot” is one of Instructable.com’s most popular robot projects. If you plugged the right servo into channel 1 and the left into channel 2, switch them and plug the right into channel 2 and the left into channel 1.What is the best servo motor for a small robot? For a beginner, it's recommended to use a type of plastic called HDPE.

and a great weekend project for anyone driven enough! wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors.

Without any mechanical or coding knowledge, you can build your own toy Ganker robot and battle through the use of an attached app. Otherwise, a great bot! 9 years ago You may have to attach an additional switch for that too. Where We Are, Where We Should Be, and How To Get ThereThe vibrations they create are so strong that they will propel themselves in random directions, so you can watch them shimmy across surfaces with ease.

Yes.

Would the motor be strong enough to power the saw blade so that it can cut through wood or thin metals? www.instructables.com/How-to-make-a-flamethrowing...Now you need to do the front part of the body, this is fairly easily done by first getting the two hinges, these will be placed on either side of the front of the base. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/53\/Build-a-Remote-Controlled-Robot-Step-9-Version-2.jpg\/v4-460px-Build-a-Remote-Controlled-Robot-Step-9-Version-2.jpg","bigUrl":"\/images\/thumb\/5\/53\/Build-a-Remote-Controlled-Robot-Step-9-Version-2.jpg\/aid633697-v4-728px-Build-a-Remote-Controlled-Robot-Step-9-Version-2.jpg","smallWidth":460,"smallHeight":345,"bigWidth":"728","bigHeight":"546","licensing":"